In this post I will show you step by step on how to make a paper airplane.
First you need to get a blank sheet of paper and fold from left to right as shown below.
Next you open the paper up and fold the top left corner down to look like this.
Then do the same thing with the other side so it looks like this.
The next step is to do the same thing by folding the top two corners to go directly next to the center crease like this.
As you can see on the picture above, you can cut the bottom off so your plane looks like this but you don’t have to.
Anyway, the next step is to fold the whole entire left side over to the right for it to look like this.
Then with the top part of the plane you need to fold it to the left so it looks like this.
Do the same with the other side and you should come out with a very skinny triangle. After that your plane is almost done. You just need to pull the two sides up and it should look like an airplane.
Wait, your almost done you can ( optional ) put two flaps on the back to make it either go up, down or spin. To make it spin, one flap should be facing up and one should be facing down. To make it go down, you would put both flaps down. Finally, to make it go up you need to put both flaps up as shown below.
That is all you need to know, thanks for joining me and there will be more where this came from. 🙂